vSite AR: Calibration Adjustments
AR View
To enter Calibration Adjustment Mode in AR View, tap the Adjust button located at the bottom of the screen (see Fig. 1).
Once in adjustment mode, you can fine-tune your view using the following controls:
-
Slide Scale (Elevation Adjustment):
Swipe on the Slide Scale to raise or lower the projected scene. This changes your elevation relative to the model (see Fig. 2). -
Bottom Scale (Orientation Adjustment):
Swipe on the Bottom Scale to rotate the scene left or right in 0.1° increments. The scale is designed with reduced sensitivity to allow for precise adjustments. -
Screen Swipe (Position Adjustment):
Swipe in any direction across the middle of the screen to shift your location. The projected scene will move accordingly in the direction you swipe.
Map View
You can also access Calibration Adjustment Mode from the Map View. While in Map View, tap the Tools button to open the Map Tools menu. From here, tap the Adjust button.
In Map View, you can adjust your position and orientation:
-
Orientation:
Rotate the scene in 0.1° increments by swiping on the orientation scale. Like in AR View, the scale is designed for high-precision control. -
Location Adjustment:
Tap and drag your location marker to reposition it as needed. -
Zoom:
Use the standard pinch-to-zoom gesture to zoom in or out on the map.
Note: The adjustment screen will close automatically after 3 seconds of inactivity. A circle will form around the X button (top-left corner in Map View) to indicate the timeout.
Fig. 1
Fig. 2
Have Questions? Feel free to Submit A Request to speak with a member of the vGIS Support Team.
Reviewed: 2024-04-19