Reality Capture Scans are Showing in the Wrong Location

Issue

When reviewing an uploaded scan in the vSite Admin Portal, the location is off (even if the scan was scanned at the right location previously).

Quick Fix

In order for the scans to appear correctly, follow these steps:

1. Connect your GNSS receiver
2. Make sure your accuracy is better than 10cm
3. Launch vSite Scan
4. Process and upload all previously collected scans (More detailed instructions here).
5. If you simply upload scans from the scanner, or launch the scanner after manual calibrations, the location of the scan will be overwritten.

Additional Resources: 

User Onboarding: GNSS

User Onboarding: GNSS Hardware/ Software

vSite AR: AR Calibration

Have Questions? Feel free to Submit A Request to speak with a member of the vGIS Support Team.

Reviewed:  2025-05-14